Waterproofing Leaking Balconies

Waterproofing Leaking Balconies Melbourne

New Waterproofing Leaking Balconies Service Melbourne

Waterproofing of external wet areas, such as balconies, decks, courtyards and terraces are consistently among the most common reoccurring problematic areas for both domestic housing and commercial apartment blocks. They are considered a category one (major) building defect among home-owner complaints about defective external wet areas; ranking second highest overall and thus, waterproofing leaking balconies in Melbourne is the need of the hour. By using the qualified waterproofing technicians from Australian Waterproofing Company for waterproofing leaking balconies in Melbourne, you can give your project the best chance of a long term waterproofing solution.

Australian Waterproofing Company highly recommends for new external balconies you only use a sheet membrane where possible, especially if it is over a habitable living area. At Australian Waterproofing Company we have repaired or replaced over 600 balconies in Melbourne and surrounding areas. In our years of experience, we have found there has been a common factor to balcony failure. Regardless of applicator or manufacturer, the common dominator was that a liquid membrane was applied for waterproofing leaking balconies in Melbourne. If your waterproofer or tiler cannot install sheet membranes, please give us a call and we can supply and install the best product for your external wet area.

The product we use is:
3mm torch on, which is a flexible waterproofing membrane consisting of a mixture of penetration bitumen, modified with Atactic Polypropylene (APP), and reinforced with a layer of non-woven polyester is what we use for waterproofing leaking balconies in Melbourne. The underside finishing of the sheet consists of an ultra-thin Polyethylene foil for fast burn and greater adhesion to most sub-straights. The upper surface is finished with a mixture of talcum and sand, this gives a fantastic mechanical finish making it easy to get adhesion for direct sticking tiles or applying a sand and cement screed for creating fall.

balconies